Carbon Series Ultralight Gen2

Original price was: $165.00.Current price is: $159.99.

****Color Packages is the color of rivets and a headband to match****

****Color Packages is the color of rivets and a headband to match****


Please note the New Genesis Eyebox is not ASNI rated Z87+


Carbon Fiber Welding Hood For Sale

ASNI rated Z87+ Ultralight Full Carbon Fiber Gen2 Welding Hood
10.5” Front With flat edge, custom cut side wing with notches for shoulder clearance
Weight- 9.5oz
Pancake welding hood comes with head band, lens spring, and lens box cover. Shipping costs are additional

WARNING!  This is a Carbon Fiber Welding Hood. Carbon is a conductor of electricity.  When using DO NOT allow the Welding Hood to make simultaneous contact with the stinger and material your ground lead is place on. Doing so could result in electrical shock, burns or eye injury.  Serious injury including eye injury and vision loss and possibly death may occur from misuse of this product or failure to read and heed safety warning on this label.  Read and follow all labels and any manuals included with this product or available from CMR Fabrications LLC carefully before use.  Federal and State OSHA requirements should be followed for use of this product. During the welding process, heat and radiation are released, which can cause damage to the eyes and skin. This welding hood helps protect against certain eye and face welding hazards. When wearing, your eyes are always protected against ultraviolet and infrared radiation, regardless of the shade level. To protect the rest of your body, appropriate protective clothing must also be worn. Particles and substances released during the welding process can cause allegoric skin reactions in people who are susceptible. Skin contact with the fabric component can lead to allergic reactions in people who are susceptible. The protective welding hood must only be used for welding and grinding and not for other applications. CMR Fabrications LLC assumes no liability when the welding hood is used for other purposes other than intended or with disregard for the operating instructions. The hood is suitable for all established welding procedures, excluding gas and laser welding.

Additional information

Weight 1 lbs
Dimensions 10 × 10 × 10 in

Right-Handed, Left-Handed

Average Rating

3 Review
5 star 67%

4 star 34%

3 star 0%

2 star 0%

1 star 0%

3 reviews for Carbon Series Ultralight Gen2

  1. Daniel Boone (verified owner)

    These hoods are way lighter and definitely worth getting. And noticably lighter. Even other ppl who have not felt one pick it up and are say “damn thats light” 🤙🤙 carbon fiber is where it’s at yall

    • pwsadmin (verified owner)

      Thank you!

  2. Joey fuss (verified owner)

    I have the carbon ultralight gen 2 with the genesis eyebox and it’s by far the best hood I’ve ever had. Super light and easy to get into tight spots, the only complaint I have is the rubber in the eyebox that sits on your face comes lose. The screw pulls out occasionally when pulling it down. Could be my fault having it tighter than normal due to welding in weird out of positions and fear of dropping it. It’s not a game changer though. Even though they pull out I’ve never had it sit on my face out of position. I just put a small washer on it and no more problems. And the head band pulls off of the brackets that hold it to the hood. Again probably user error and pulling it too tight. It’s a super easy fix by threading it back into position. They might even have a better solution now I haven’t looked. But these are super easy to overlook because of the quality overall in this design. I show everyone and tell them it’s the best hood I’ve ever owned. I will definitely buy again when I finally break this one.

  3. Brad


Add a review

Your email address will not be published. Required fields are marked *